| Author |
 Topic  |
|
|
93Fox
New Member
17 Posts |
 Posted - 02/03/2009 : 02:00:02
|
the original owner had the car in maine(according to old paperwork left inside), it has migrated up to alaska, and i bought it from my coast guard neighbor, and now it is being transformed into something completely unseen,
summer 08
winter 08-09
Nice looking exhaust stack coming this week,
the horns being mounted 
|
|
|
93Fox
New Member
17 Posts |
Posted - 02/03/2009 : 07:05:14
|
| im trying to find a locking differential, or at least a upgrade from the stock one. not expecting it to bolt right up but if there is a way to make 1 work, im determined to find it. any help or ideas much appreciated |
 |
|
|
tougefox
Administrator
USA
834 Posts |
Posted - 02/03/2009 : 11:56:56
|
| THIS CANT BE SERIOUS! |
The Touge: Where drivers are found, not wanted...
 |
|
|
|
93Fox
New Member
17 Posts |
Posted - 02/05/2009 : 19:52:20
|
lol, o but it is, daily driver for almost 2 years now too!! 08is when it got the big lights, then the bumper, and went from there, and here it is now lol
and i found a 94 jetta so im going to throw on the ABA and then fix up my block as a backup, |
Edited by - 93Fox on 02/06/2009 19:32:19 |
|
|
|
93Fox
New Member
17 Posts |
Posted - 03/12/2009 : 17:10:08
|
| well i finished fine tuning the aba, it is runnin nearly 12:1 compression 10degrees advanced timing and now it drives like it should, found some dual piston calipers from an audi to go with my 11" summer brakes, 60hp more and a better differential and i could almost keep up with my honda prelude vtec, honda pulls strong all the way to 120-125mph tho, |
|
|
|
lilgreydentwagen
Administrator
USA
96 Posts |
Posted - 03/20/2009 : 00:34:31
|
now all ya need is a 4 inch lift and a quattro setup... and a couple more of these |
that'll teach em to take my parking spot |
|
|
|
93Fox
New Member
17 Posts |
Posted - 03/21/2009 : 00:19:39
|
workin on putting 225/40/18's on it for the summer, along with dual piston front calipers from a 1990 audi 200 with the G60's 11" rotor. right now i have jetta rear springs and going to put jetta rear shocks on it this summer, they are taller with the same amount of travel so i can lift the car without running out of shock space. gotta move the spring plate up a couple inches to clear the tire.
on the front i will be using 10mm spacers to clear the tie rod, and putting the front springs from the jetta up front and then probably make the spring compressed another inch or 2 to stiffen it up so the finders dont slam onto the tires when i turn or stop hard. |
|
|
| |
Topic |
|
FOX from maine to AK
